MODELS


Standard Features
  • KUBOTA Diesel Engine
  • Blue Molded Silicone Hoses
  • Multiple Cylinders for Smooth Operation with Minimum Vibration
  • Three Vortex Combustion System to Reduce Noise, Lower Emissions, & Increase Fuel Economy
  • Glow Plugs for Cold Weather Starting
  • Z-F Industries / Hurth Marine Gear
  • Fresh Water Cooling System
  • Integral “Cupro-Nickel” Removable Heat Exchanger Core
  • “Phosphor Bronze” Heat Exchanger End Caps
  • Gear Driven Camshaft and Oil Pump
  • Direct Driven Flange Mounted Raw Water Pump
  • 316L - Stainless Steel Exhaust Outlet
  • Heavy Duty Modular Frame Rails
  • Flexible Vibration Isolators, Adjustable, Fully Captive
  • Air Intake Cleaner/Silencer
  • 12V Electric Starting System - High Output Gear Reduction
  • 12V 40Amp Charging System with Internal Regulation
  • Key Switch Start - Lockable
  • Energize to Stop Solenoid - Push Button
  • Forged Brass Oil Drain Valve with Safety Lock
  • Mechanical Fuel Transfer Pump
  • Audible/Visual Alarm for High Coolant Temp / Low Oil Pressure
  • Zinc Anode in Heat Exchanger
  • Remote Start Panel with Key Switch Start, Safety Alarm & Push Button Stop
  • Acrylic Enamel “Silver” Finish
  • Secondary 5Micron Spin-On Fuel Filter
  • Full-Flow Spin-On Lube Oil Filter
  • Non-Corrosive Tinned Engine Wiring
P4-42-03

k3_15.gif
Optional Features
  • Balmar 85 Amp Model 70-80 Alternator
  • Various Regulators Available Depending upon Application
  • DELUXE Engine Gauge Panel with with Electronic Tachometer, Oil Pressure Gauge, Water Temp. Gauge, Voltmeter, Hourmeter and Keyswitch Stop/Start Control
  • Z-F Industries / Hurth Down Angle and V - Drive Gears
  • Flexible Output Couplings
  • 12 Volt Electric Oil Change System
  • KEEL Cooling System
  • Dual Groove Front Pulley for Auxiliary Power
  • Remote Oil Filter Kits
  • Hourmeter with Change Interval Indicator
  • Awlgrip Paint Finish - Various Colors
 
Specifications
 Kubota Model   V1903E
 Number of Cylinders   4
 Configuration   4 Stroke, Vertical, Indirect Injected, Water Cooled
 Bore/Stroke inches   3.15” x 3.64”
 Bore/Stroke mm   80 x 92.4mm
 Displacement cu. in   113.37 cu. in.
 Displacement cu. cm   1857cc
 Gross BHP @ 2,800RPM   42
 Starting System   12 VDC High Output Gear Reduction
 Charging System   12VDC/40Amp - Internally Regulated
 Combustion System   E-TVCS, 3 Vortex Pre-Combustion Chamber Design
 Cooling System   Fresh Water Heat Exchanger w/ Direct Driven Raw Water Pump
 Lubrication System   Forced Lubrication with Trochoid Gear Driven Pump
 Reduction Trans.   Z-F Industries / Hurth Model HBW-150 Standard Ratio 1.88 to 1
  Dimensions in. LxWxH   35.5 x 19.5 x 25
  Weight / Dry   498lbs.

Specifications are subject to change without notice.

Site Design By: Mdverb.com
© 2001 Phasor Marine